Di-O-Clean Powder, 25 liter

Di-O-Clean is developed for drinking water treatment and cleaning and disinfection of drinking water systems in the professional livestock industry.

Di-O-Clean consists of two components which will generate, after blending, a 99,9% pure chlorine dioxide solution, without any chlorine or other harmful by-products.

Di-O-Clean consists of two components (A + B) which are packed separately. Once mixed together with water, the product becomes Chlorine Dioxide. For best results this solution should be applied continuously to the drinking water lines by means of a special dosing pump.

Advantages of Di-O-Clean:

• Disinfects water lines and drinking water. It eliminates all kinds of germs, bacteria, fungi and virusses
• Removes the biofilm in the water pipe and prevents the formation of biofilm by dosing continuously
• Removes iron and manganese deposits in the water pipe
• Is not corrosive to the drinking water system after dosing
• Is pH-independent (effective at pH 2-10)
• Suitable for use in the treatment of sulphurous water
  260% more effective than a disinfectant on the basis of chlorine (sodium hypochlorite, bleach water, active chlorine, etc.)
• Reacts directly with the cell wall of micro-organisms (bacteria, salmonella, yeasts, fungi and viruses), so that no resistance is built up
• Does not form toxic by-products such as THM, HAA, Mutagen X and chlorinated phenols, such as in the use of chlorine
• Does not affect the smell and taste of the water, in contrast to chlorine
• Is very easy to use
• Makes water a safe and valuable nutrient
• No smell or taste

Application:

Phase 1: Cleaning

• Remove biofilm
• Remove deposits of iron and manganese
• Duration: 3-6 weeks, depending on level of pollution
• Dosage: 330 ppm (which is 330 ml of stock solution / 1000 liter water)
• Can be used whilst animals are inside the barn

Phase 2: Maintenance

• Prevent regrowth of biofilm
• Reduce of germ pressure
• Duration: continuously
• Dosage: 50-100 ml (which is 50-100 ml of stock solution/ 1000 liter water, depending of germ pressure)
• Can be used whilst animals are inside the barn

Phase 3: After using additives

• Remove rests of additives which have been used
• Duration: 3 days
• Dosage: 150 - 200 ppm (which is 150-200 ml of stock solution / 1000 liter water)
• Can be used whilst animals are inside the barn
• After 3 days continue with maintenance phase

Operating instructions: Store separate components at a dark place with a temperature of at least 10°C

1. Put water in an empty can
2. Add component B to the water
3. Add component A to the mixture
4. Do not shake and put the lid on the can
5. Wait for 30 minutes
6. Remove the lid and stir gently
7. The Di-O-Clean is now ready to use
8. Dose the solution to the drinking water system with the Digi Doser Di-O 2,5 or 10
9. Use the mixture within 30 days after blending

Use biocides safely. Always read the label and product information before use.