Swich to desktop website
MSE Primecoat-trans 5 kg
- M6309804COMP
Special transparent Primecoat, based on two components Expoxy, that must be applied on a prepared substrate en ensures a good adhesion of the coating products. Applying Primecoat is always strictly necessary to optimize the adhesion. The Primecoat can also be used as an topcoat on floors and grills. Packing sizes: 5 kg.
Characteristics MSE Primecoat-trans:
- Consumption: 0,15 to 0,25 kg/m² per layer. Depending on the substrate and the purpose of use
- Drying time: 16-24 hours depending on the temperature of the environment
- Working temperature: between 10°C and 25°C
- Working time after mixing: 25 minutes
- Application material: roller/scoop, brushes, mixer
- Substrate: absorbing substrate, press/pull resistant concrete, concrete decks and walls
- Ordering: sets of 5 kg.
The complete coating exists out of an A and B component and both need to be ordered.
Special transparent Primecoat, based on two components Expoxy, that must be applied on a prepared substrate en ensures a good adhesion of the coating products. Applying Primecoat is always strictly necessary to optimize the adhesion. The Primecoat can also be used as an topcoat on floors and grills. Packing sizes: 5 kg.
Characteristics MSE Primecoat-trans:
- Consumption: 0,15 to 0,25 kg/m² per layer. Depending on the substrate and the purpose of use
- Drying time: 16-24 hours depending on the temperature of the environment
- Working temperature: between 10°C and 25°C
- Working time after mixing: 25 minutes
- Application material: roller/scoop, brushes, mixer
- Substrate: absorbing substrate, press/pull resistant concrete, concrete decks and walls
- Ordering: sets of 5 kg.
The complete coating exists out of an A and B component and both need to be ordered.