Digi Doser Di-O 10 is a dosing system to add Di-O-Clean into the drinking water system. The system is equipped with a digital membrane pump, that doses the right amount of Di-O-Clean in the water pipe based on the pulses of the water meter.

• Specially developed to dose low doses in a precise way
• Made of special materials that are resistant to chlorine dioxide

• Flow rate: 200 – 10.000 L/hour
• Water pressure: 0,05 - 5 bar
• Dosage: 1 - 350 ppm
• Volume per injection: 0.50 ml
• Max. number of injections per minute: 180
• Max. pump capacity: 5,400L / h
• Pulse meter: 18 p/liter
• Input and output connections: 1 1/2"- 1 1/2"

• Mount the pump as close as possible after entering the source and tap water. In this way, the entire drinking water system can be cleaned and disinfected as completely as possible
• Create a by-pass, so the drinking water system can also be used during an defect or malfunction at any time
• Upon startup or replacement of parts, the Digi Doser must be calibrated