The MS Heatmat is an electric heating mat for use in piglet bedding, which provides essential warmth that piglets need during the first period of their lives.

MS Heatmats are available in different sizes. MS Heatmats should always be used in combination with a controller (not included).

• Reduces mortality rate
• Even heat distribution
• Energy efficient through insulation
• Resistant material
• Adjustable temperature
• Max 14ºC warmer than ambient/room temperature
• Suitable for all types of flooring

• The heat spreads better among animals: Each pig in the right temperarture zone. More comfort for direct heating of lying surface
• Cooler environment for the sow: More feed intake and less ventilation as a result of lower temperatures, so that the sow and piglet are less in a draft
• About 65-85% less energy consumption compared to a pig lamp
• Lower fire risk
• Contributes to the reduction of newborn piglet mortality by preventing hypothermia
• Easy to install on the bottom of all existing floors and grids
• The controller is adjustable. By pressing the plus (+) button the temperature can be increased in increments of 5ºC to a maximum.
• 6 mm insulation, which halves the energy consumption to only 60/80/100 Watt per mat (depending on size)
• The electric cable (2 m) is protected with a flexible stainless steel tube from the penetration of moisture and against damage by the animals

• Voltage: 230 V
• Power: 60 W
• Model: rectangular, right connection
• Sensor: no
• Safety class: IPX7

90 x 40 cm

• The MS Heatmat should always be used in combination with a controller. After the heatmat and cable are installed, the top of the tube should be sealed with silicone or a similar material so that no moisture can come into contact with the electrical connection
• In case of stand-alone: One 'Controller 2200W for MS Heatmat' per 20 mats. One control per temperature zone including operation. One 'MS Heatmat including sensor' (always consult your technician). Glue for glueing one sensor. Heatmats with correct sizes and version (left/right)
• When communicating with a climate system: One power box per 20 mats. One control per temperature zone excluding operation. Sensor for climate system (always consult your electrician). Glue for glueing one sensor. Heatmats with correct sizes and version (left/right)

GRP (glass fibre reinforced plastic)