Continue to www.msschippers.com?

MS Gel Repair, 5,5 kg - Cracks, gaps and seams

MS Gel Repair, 5,5 kg

Art. no.: 6309810

Brand:

You can only order this product by e-mail or by phone.

Send us an email

Compare

You can only order this product by e-mail or by phone.

Send us an email

Compare

Customer rating: 8.5/10

Knowledge center

Quality products

MS Gel Repair is a transparent epoxy gel coating consisting of 2 components for filling cracks, joints and saw cuts in concrete and cement screed floors. This creates a flat and liquid-tight floor that is very easy to clean for optimal hygiene.

The MS Gel Repair is a transparent epoxy gel consisting of two components. Because it is a fairly stiff gel, it flows into the cracks and seams, but continues hanging as a drop.

Application: The MS Gel Repair is applied in cracks and seams, where ever they need to be sealed. For repair or to seal joints in unhygienic dilation e.g. in poultry houses.

For a flat and hygienic floor
Waterproof
Maximum seam width: 8 mm
Due to the stiff gel, the gel remains stuck in the seam and consumption is minimized
Transparent
Easy to apply yourself

Dosage:

Consumption of the MS Gel Repair is highly dependent on the width and depth of the cracks. This cannot be said in advance. Consult the representative in advance, price indication +/- 200 grams per linear meter
Because it is a fairly stiff gel, it flows into the cracks and seams to be treated, but remains as a drop. This minimizes consumption

Administering:

Application material: drill, paint mixer, trowel, squeegee, putty knife
Substrate (dry): concrete or cement deck

Application:

The surface must be clean, dry and dust-free
Pour the B-component into the can of the A-component
Mix this using a paint mixer for at least 3 minutes until it becomes a homogeneous mixture
Use a low speed so that air mixing is reduced to a minimum
Spread the mixture into the crack or hole with a trowel or squeegee
Using the tool, push a small amount of gel forward so that the gel flows into the seam
Iron over the seam several times for optimal distribution and depth of the gel
Allow the floor to harden for at least 24 hours

Tips for users:

Always read the user manual before use
Quick and easy to apply
Dust-free
Very wear-resistant
Chemically resistant
Drying time: 24 hours depending on ambient temperature
Processing temperature: between 10°C and 30°C
Processing time after mixing: up to max. 20 minutes, depending on the ambient temperature
Mechanically loadable after 2 days
Chemically resistant after 7 days

Technical specifications:

Colour: transparent
Contents: 5.5 kg

Area to be coated	Poultry stable
Pieces	1
CLP regulation	This item is subject to CLP regulation. Please read the safety instructions before use.
Material	Epoxy
Operating temperature	10 – 30 °C
Coating layer	Repair
Warranty	Standard, in accordance with our general service & warranty conditions, listed under the heading "Customer Service -> Complaints & Returns" at the bottom of this web page.
Document note	Always read the user manual before use.
Coating type	Floor coating
Storage temperature	10 – 25 °C
Animal group	Poultry
Volume	5.5 kg